The change in temperature and performance tyres

The armchair experts and fresh-faced tuners are highly inclined towards the allure of anodized turbochargers and top dollar racing shocks as the assert bits that makes the exceptional bits in order to achieve high-quality performance. The pieces definitely play an important parting in whittling away at lap times and increasing trap speeds, however; an aspiring driver would really want to chip away at-nay, chop chunk off- their times. They have got to get their head around performance tires. Contrary to the bolt on modification, buying a nice set of sticky tires requires sympathetic touch and a highly comprehensive understanding of the rubber's limitation. However tricky and demanding they are, the one variable which makes a great impact and difference in the performance in any category, they are highly significant. Simply a piece of piss it is.

What a focused tyre cannot do

A DOT R-compound tyre has a narrow operating range, unalike an all-weather tyre that typically ranges between 160 ˚F to 220 ˚F. The tyre fails to provide a larger grip or feel on either side of this range and some even autumn more abruptly than the others. Analyze the sweet spot where the tyre operates at its maximum capability, grow greasy is the key when the tyre begins to overheat. Besides the temperature, the peak ranges in performance whereas the usual performance tyre is a bit narrower in comparison. The TOYO's product engineer drew Dayton states, “A street tyre will be much easier to drive at the limit and will be more forgiving if driven above the limit. Street tires usually offer more audible feedback which can help the novice driver hear what is going on with the tyre before they may actually feel what is going on with the tyre." Such level of progression is highly helpful for the amateur driver who typically faces a hard time reacting to the rapid breakaway of a hardcore tyre.

The optimal grip on roads

Dayton states, "The DOT-R tyre will have a lot more grip than a street style which potentially mask some driver deficiencies since the limit is so much higher, a driver streaking away on the DOT-R tires might not be pushing quite as hard as the charger on all season". He further said, "A winter tyre is designed with a special compound that stays soft at freezing temperature. This has to do with the glass transition temperature of the rubber compound; of course, this helps in chilly weather but when pushed to the limit, these tires generally become useless after a dozen hot laps- they are reduced to silly putty."

A performance- orientated tyre is not efficient in various situations and it's probably the best used on a track. Dayton further adds regarding the subject, "An R-compound will get harder and harder as the temperature gets lower and lower. At some point, the compound will lose enough of its flexibility that it can crack under load or movement." that being said, there are shades of grey to this black rubber market and there's always a deal offering an ideal compromise between fraction and cordiality in chilly weather.

Dealing with heat

To initiate understanding the racing tires, a driver needs to arrange a set of contact thermometers and some preliminary measurements. Using style thermocouple is much better than infrared sensors due to their temperature reading of the carcass of the tyre and not just the tread surface. By installing a thermocouple probe into the meat of the tyre, roughly 1 mm, the user attains a more precise sense of the general tyre temperature as the surface temperatures rapidly fluctuate.

Firstly, the user must pierce the tread on the outside, centre and the inside. The roughly taken outermost measurements are 1 inch from the tyre's verge. Assess the tread wear and temperature across the three stated areas as we will provide a clear contemplation of a contact patch and the location of tyre usage. Ideally, the tyre must be equally spread across the surface of the road but it is a challenging goal to achieve due to the surface undulation, incorrect suspension settings and corners of various radii and speeds.

However, this approach will work on the track rats' amateur racers but the pros in the big leagues- gt3 racing and further up the totem pole- hold of a few other options at their disposal. Dayton informed “There are TPMS based solutions that measure the air pressure and the internal temperature with an infrared thermometer built into the TPMS system. there are also systems which can be tied into that telemetry and data acquisition to measure the temperature of the tread from the outside." a series of infrared sensors and cameras are installed to the vehicle in order to measure thread surface temperature during the race progression and provide the guys running at lemans a spot-on of longevity that is highly required to outrun their rivals.

Analyzing temperatures to get performance

"Tyre temperature can be used to analyze the alignment setup, pressure settings and the overall performance of a tyre", notified Dayton. An intelligent user uses those reading and assesses the specific issue occurring with the tyre. If the centre is significantly hotter than the others, they can try lowering its type pressure in order to reduce the ballooning of the tyre and if the edges are hotter than the centre, the tyre must be concave and requires a few pounds of air.

Similarly, if the inner edge is way too hot, there are chances of too much static negative camber and the face edge of the tyre isn't coming into contact frequently enough with the asphalt. The heating up of the outer edge is likely to indicate that there is not enough negative camber or possibly too much toe-in. if the tyre never reaches the ideal temperature, it is a possibility that the tyre is too wide, over-inflated or the particular axle isn't as soft and compliant as it should be.

If the tyre gets too hot, it is an indication of some telltale signs. Jay Jones, an experienced instructor and a long-time SCCA racer, from TOYO, states, "You listen to the tyre as it skips over the road way, if it's producing a hollow sound like a thumb on a watermelon, it's probably past its best capability." it is the high time when the tyre is concave in shape due to elevated inflation pressure and skips across the surface on the centre of the narrowed contact patch of the road.

Without any evidence change in technique, if the tyre begins to give up and slide more frequently, it's safe to state that the tyre is past its peak performance range. Jones wisely instructed on the matter, “Racing is all about resource management. At that point, you have to back off slightly which requires a lot of discipline!" the heat of the competition is phenomenal as it exceptionally challenges to restraint and spends a little less energy into the tyre. It is the best way to revive them into the ideal range and improved average race pace which is the real goal at the end of the day. This gave Alain Prost the ability to achieve victory out of nowhere in the race.

Afterwards, the management of a series of hot laps within their personal best ability is ought to peel away from the track and whip out the pyrometer. Dayton suggested, “After a lapping session, pull into hot pits without a cool down lap if your vehicle permits as this will give the most accurate temperature reading. Begin with the tyre doing the most amount of work around the track which is usually one of the outside tires and after taking temperature measurement also read the hot pressure measurement in the same order around the vehicle and analyze the result."

With the right knowledge of temperature and pressure measurements, the driver acquires a general target whilst lapping. There may be a possibility of the quicker lapse on that tyre but a street tyre even it's a track- orientated one might rapidly degrade if pushed beyond its ideal temperature range. At this pace, the vehicle's behavior can be analyzed efficiently to achieve consistency in the tyre and it is very helpful for the enthusiasts who find more speed and refuse setting pole position.

Tyre pressure and temperature

An avid track rat expects to achieve a sense of the tyre and its characteristics as it breaks away on the best of its ability. After practice, in order to speed, a driver can string together 15 quick and consistent laps, they are only possible within the ideal temperature window. Dayton added, "As with any data collection, taking temperatures systematically will provide consistent data that can easily be compared to data from other runs." Choice! 

Subscribe to our newsletter

Answer to: {{replyComment.author}}
All fields are mandatory
Comment was submitted successfully

Back to top